Photonic Universe LFP Series Instruction Manual

Rechargeable lifepo4 battery pack

Advertisement

Rechargeable LiFePO4 Battery Pack
Dear Customer,
Thank you very much for choosing our product. This manual contains important information
about the installation, operation, and safety of the Photonic Universe LiFePO4 battery. Please
read this manual carefully before installing the product. Failure to follow any instructions,
warnings, as well as commonly accepted safety principles may result in an electric shock, injury
or damage to the battery.
Overview
This lithium iron phosphate (LiFePO4) battery is a high-cycle energy storage product that
provides a power source for various equipment and systems. This LiFePO4 battery features a
built-in electronic Battery Management System (BMS), which manages the battery charging and
discharging processes and monitors the battery voltage, current and temperature, ensuring it
operates safely and efficiently.
Due to the BMS, the behaviour of this battery in various conditions may differ from other
batteries without a BMS, especially if you are used to operating lead-acid batteries. In particular,
the BMS may automatically disconnect the battery from your equipment in critical situations,
such when your equipment is drawing too much power, including at the start or at peak times
(for example inverters) or the battery is being discharged too deeply. The range of BMS
protection functions which safeguard the battery from potential damage includes:
-
Over charging
-
Over discharging
-
Over current
-
Over temperature
The battery features a low self-discharge rate, which minimises the power loss when the
battery is not in use. This ensures that energy is conserved and available when needed.
12V and 24V models LFP series
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LFP Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Photonic Universe LFP Series

  • Page 1 Dear Customer, Thank you very much for choosing our product. This manual contains important information about the installation, operation, and safety of the Photonic Universe LiFePO4 battery. Please read this manual carefully before installing the product. Failure to follow any instructions, warnings, as well as commonly accepted safety principles may result in an electric shock, injury or damage to the battery.
  • Page 2 Instructions for use Recommended tools Use appropriately insulated tools to prevent accidental electric shock or short circuits. If insulated tools are not available, cover all exposed metal on the tool, except the tips, with electrical tape or use insulated gloves. Recommended safety gear It is strongly recommended that you use personal safety gear when working with batteries, such as gloves, goggles, appropriate clothing, and safety shoes with toe caps.
  • Page 3: Maintenance And Storage

    • The distance from the air outlet of an inverter is more than 0.5 meters. • The battery is not installed in direct sunlight. • Avoid installing the battery in confined areas. • Do not install the battery outdoors and keep all connectors / contacts indoors. Caution: if the ambient temperature is outside of the operating range, the battery pack will stop operating to protect itself.
  • Page 4: Environmentally-Friendly Disposal

    • If the battery was fully discharged, recharge it within 12 hours after that. • All terminals, connectors, grounding points, cables and screws must be checked at least once a year. Ensure there are no loose, broken, or corroded connectors or parts. Check the installation environment for dust, water, insects etc.
  • Page 5: Specifications

    Specifications Model LFP12-50 LFP12-100 LFP12-200 LFP24-100 LFP24-120 LFP24-200 Nominal voltage 12.8V 25.6V Nominal capacity 50Ah 100Ah 200Ah 100Ah 120Ah 200Ah Nominal energy 640Wh 1280Wh 2560Wh 2560Wh 3072Wh 5120Wh Life cycles 6000 cycles @ 80% depth of discharge, at 25°C Operating voltage 10.8 - 14.6V 21.6 - 29.2V End of discharge voltage...
  • Page 6 Optional surface mounted (CB series) and recess mounted (CBR series) DC circuit breakers can be purchased from Photonic Universe and used instead of fuses when connecting this battery to your system. A breaker will act as an On/Off isolator switch for the battery and will also provide additional over-current protection to supplement the BMS function.
  • Page 7 All work should follow the safety standards and should be carried out by an appropriately qualified person. Photonic Universe Ltd is not responsible for any damage or injury caused by inappropriate installation or use of the product.
  • Page 8 Photonic Universe Ltd E-mail: info@photonicuniverse.com Web: www.photonicuniverse.com Tel.: +44 (0) 203 150 11 11 Fax: +44 (0) 203 150 12 12...

This manual is also suitable for:

Lfp12-50Lfp12-100Lfp12-200Lfp24-100Lfp24-120Lfp24-200

Table of Contents