Download Print this page

Photonic Universe GEL-DC-12V200AH Instruction Manual

Sealed maintenance-free 200ah 12v gel vrla deep cycle battery

Advertisement

Quick Links

Sealed maintenance-free
200Ah 12V gel VRLA deep cycle battery
Model GEL-DC-12V200AH
INSTRUCTION MANUAL
Photonic Universe Ltd
Tel: +44 (0) 203 150 1111
Fax: +44 (0) 203 150 1212
Email:
info@photonicuniverse.com
Website and online shop:
www.PhotonicUniverse.com
I. INSTALLATION AND CONNECTION
A) Keep the battery in a cool, dry, ventilated and clean place.
B) When connecting the wires, screw all the nuts, bolts and washers tightly.
C) If you use the battery within other equipment, keep it away from a heat generating source (e.g.
transformer) and install it as low as possible with proper ventilation.
D) The battery may produce combustible gas. Avoid installation in a closed compartment or near sparks (e.g.
near a switch or fuse)
E) Use well insulated tools when installing the battery.
F) Avoid using the battery in the following places:
Areas exposed to direct sunlight or any heat source
Areas with radiant heating, infrared radiation or ultraviolet radiation
Areas filled with organic solvent, vapour, dust or corrosive gases and substances
Areas with abnormal vibration or risk of mechanical damage
G) When connecting the battery to a charger or a load, keep the circuit switched OFF and connect the
battery's positive(+) terminal to the positive(+) pole of the charger or the load and the battery's negative(-)
terminal to the negative(-) pole of the charger or the load.
H) Never use batteries with different capacities or different performance characteristics within the same
battery bank, as well as new and old batteries together.
I) Do not connect more than 32 batteries in a single string or connect more than 4 strings in parallel. If more
batteries are needed for series /parallels application as stated above, please contact us.
J) Ambient working temperature: from -10 ⁰C to +50 ⁰C.
II. CHARGE & DISCHARGE
A)
CHARGE
For Cycle Use
(when the battery is used as a regular power source and it's discharged / charged frequently)
Charging voltage (at 25 ⁰C)
Initial charging current
14.1V – 14.4V
If the battery is in cycle use, it is important to fully charge it regularly to minimise sulphation that may cause a
reduction in battery capacity. For best results use an intelligent multi-stage battery charger / charge controller
and make sure the battery is charged all the way to the final stage.
Temperature coefficient
40A max
-30mV/⁰C
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the GEL-DC-12V200AH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Photonic Universe GEL-DC-12V200AH

  • Page 1 G) When connecting the battery to a charger or a load, keep the circuit switched OFF and connect the battery’s positive(+) terminal to the positive(+) pole of the charger or the load and the battery’s negative(-) Model GEL-DC-12V200AH terminal to the negative(-) pole of the charger or the load.
  • Page 2 1. When the following abnormalities are observed, discover the cause and replace any defective batteries: should be carried out by an appropriately qualified person. a. Any voltage abnormalities Photonic Universe Ltd is not responsible for any damage or injury caused by inappropriate installation or use of the product.