Samsung LN-R408D Owner's Instructions Manual page 16

C
O N N E C T I O N S
4
Connect an RF
cable between the
ANT OUT terminal
on the cable box
and the B–IN
terminal on the
A/B switch.
5
Connect another
cable between the
other OUT terminal
on the splitter and
the A–IN terminal on
the RF (A/B) switch.
6
Connect the last
RF cable between the
OUT terminal on the
RF (A/B) switch and
the ANT 1 IN(CABLE)
terminal on the rear
of the TV.
After you have made this connection, set the A/B switch to the "A" position for normal
viewing. Set the A/B switch to the "B" position to view scrambled channels.
(When you set the A/B switch to "B", you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)
Incoming
cable
Splitter
Incoming
cable
Splitter
Incoming
cable
Splitter
10
English-
Cable Box
Cable Box
RF (A/B)
Cable Box Switch
RF (A/B)
Switch
RF (A/B)
Switch
ANT 1IN
(CABLE)
TV Rear