Rohnson R-1215 Instruction Manual
  1. Manuals
  2. Brands
  3. Rohnson Manuals
  4. Vacuum Cleaner
  5. R-1215
  6. Instruction manual

Rohnson R-1215 Instruction Manual

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

VACUUM CLEANER
MODEL NO.: R-1215
INSTRUCTION MANUAL
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R-1215 and is the answer not in the manual?

Questions and answers

Related Manuals for Rohnson R-1215

Summary of Contents for Rohnson R-1215

  • Page 1 VACUUM CLEANER MODEL NO.: R-1215 INSTRUCTION MANUAL...
  • Page 2 IMPORTANT 1. Read this instruction booklet carefully. 2. Before using the appliance, check that the mains power voltage corresponds to the voltage shown on the rating plate. 3. The appliance should be connected to a correctly earthed 10 power socket. 4.
  • Page 3 Description 1. Floor brush 2. Extension tube 3. Dust container release button 4. ON/OFF button 5. Power cord 6. Dust release button 7. Crevice nozzle 8. wall mount 9. Fixed screw Note: Illustrations may differ from actual product. Precautionary Measures Important: If the suction opening in the unit or the hose is blocked, switch off the vacuum cleaner and remove the blocking substance before you start the unit again.
  • Page 4 3. Before you start vacuuming, make sure to remove large or sharp objects that might damage the dust cup filter. 4. When pulling out the power plug from the wall outlet, pull the plug not the power cord. 5. Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes.

  • Page 5: Operating The Vacuum

    USE THE ACCESSORIES Floor Brush • Fit the floor nozzle into the telescopic tube. The floor nozzle has two settings. When cleaning hard surfaces (parquet flooring, flooring tiles, etc.), the nozzle brushes should be extended. When cleaning carpets and mats, the brushes should be retracted into the nozzle.

  • Page 6: Cleaning The Filter

    3. Over a waste bin, press the dust release button to open the bottom cover and expel any dust, dirt and debris. Wipe clean only, do not submerge in water. ClEANING THE FILTER 1. Remove the dust container from the main body.

  • Page 7: Troubleshooting

    Troubleshooting PROBLEM POSSIBLE REASON POSSIBLE SOLUTION VACUUM WILL NOT 1. No power in electrical outlet 1. Check fuse or breaker. supplying transformer. Replace fuse/reset breaker. OPERATE 1. Empty dust cup container VACUUM WILL NOT 1. Dust cup container is full. 2.

Table of Contents