Connecting A Vcr - Samsung LN26R51B Owner's Instructions Manual

C
O N N E C T I O N S

Connecting a VCR

These instructions
assume that you
have already
connected your TV
to an antenna or a
cable TV system
(according to the
instructions on
pages 7-10).
Skip step 1 if you
have not yet
connected to an
antenna or a cable
system.
3
Connect an RF cable
between the ANT OUT
terminal on the VCR
and the ANT IN terminal
on the TV.
4
Connect an audio cable
between the AUDIO OUT
jacks on the VCR and the
AV IN [R-AUDIO-L] jacks
on the TV.
If you have a "mono" (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left
and right audio input jacks of the TV.
5
Connect a video cable
between the
VIDEO OUT jack on the
VCR and the AV IN
[VIDEO] jack on the TV.
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
* Each external input source device has a different back panel configuration.
* When connecting an external device, match the color of the connection terminal to the cable.
1
Unplug the cable or
antenna from the
back of the TV.
2
Connect the cable or
antenna to the
ANT IN terminal on the
back of the VCR.
VCR Rear Panel
VCR Rear Panel
VCR Rear Panel
English-
Incoming Cable
or Antenna
TV Rear Panel
RF Cable (Option)
TV Rear Panel
Audio Cable (Option)
RF Cable (Option)
TV Rear Panel
Audio Cable (Option)
Video Cable (Option)
RF Cable (Option)
11
VCR Rear Panel