Do you have a question about the LN26B350F1 and is the answer not in the manual?
Questions and answers
Alberto
June 2, 2025
Está tv tem conversor digital, porque ela só tem a opção tv, e não tem a opção dtv
1 comments:
Mr. Anderson
June 2, 2025
Yes, the Samsung LN26B350F1 TV has a digital converter. This is indicated by references to digital data, HDMI input, and diagnostics involving digital signal paths such as LVDS and IC6003 in the service manual.
This answer is automatically generated
Alberto
June 2, 2025
Como configurar os canais da tv aberta
Com a antena da tv aberta
1 comments:
Mr. Anderson
June 2, 2025
To set up channels on a Samsung LN26B350F1 TV with an antenna:
1. Connect the antenna to the TV’s RF input. 2. Turn on the TV and go to the menu. 3. Navigate to the channel setup or tuning section. 4. Set the channel type to “ATV” (Analog TV) or “DTV” (Digital TV), depending on your antenna signal type. 5. Start auto tuning to let the TV scan and store available channels.
Make sure the TV is connected to a proper AC power source and do not disconnect any cables while it’s turned on.
This answer is automatically generated
Marcio Reginaldo da Silva
February 26, 2025
Boa noite. Qual nome das peças UM801S , ZM801 e RM869 , no manual só indica o código.
Need help?
Do you have a question about the LN26B350F1 and is the answer not in the manual?
Questions and answers
Está tv tem conversor digital, porque ela só tem a opção tv, e não tem a opção dtv
Yes, the Samsung LN26B350F1 TV has a digital converter. This is indicated by references to digital data, HDMI input, and diagnostics involving digital signal paths such as LVDS and IC6003 in the service manual.
This answer is automatically generated
Como configurar os canais da tv aberta Com a antena da tv aberta
To set up channels on a Samsung LN26B350F1 TV with an antenna:
1. Connect the antenna to the TV’s RF input.
2. Turn on the TV and go to the menu.
3. Navigate to the channel setup or tuning section.
4. Set the channel type to “ATV” (Analog TV) or “DTV” (Digital TV), depending on your antenna signal type.
5. Start auto tuning to let the TV scan and store available channels.
Make sure the TV is connected to a proper AC power source and do not disconnect any cables while it’s turned on.
This answer is automatically generated
Boa noite. Qual nome das peças UM801S , ZM801 e RM869 , no manual só indica o código.