urmet domus 1036/37 Quick Manual

U1 Lift Control Module (485 protocol) Quick Manual
Code: SRD-UME1036/37-0104-V1.3
Product Description
The Lift Control Module is used for forwarding the command from U1 Monitor and Call
Module to the corresponding Lift Control system.
When the Monitor or Call Module performs "Call Lift" function (likes other unlocking
functions namely call unlocking, card unlocking, user password unlocking), a control
command is forwarded to the lift control system to realize the linkage between the Lift and
U1.
Specifications
SN Description Parameters
1 Working Voltage DC 24±5V
≤ 200 mA（DC 24V）
2 Working Current
≤ 200 mV
3 Power Ripple
4 POE Voltage DC 24±5V
5 Working Humidity 35%~90%
Remark: If 485 compatible pull-up/down resistor is not added by default, set the jumper if
required.
1036/37
Version: V1.3
SN Description
6 Network 100m
transmission max.(CAT5)
7 485 Transmission 300m max.
distance
8 485 compatible 120Ω/ 1K
Pull-up/down
resistor
-10℃~+55℃
9 Working Temp
-20℃~+70℃
10 Storage Temp
1
DIMENSIONS
Overall dimensions (L×W×D):144×90×64 mm
Instruction for user
③Output
Parameters
LED
Port Description
① Power Input: DC +24V± 5V
② Network Port : RJ45：1、2 RX+、RX- ，3、6 TX+ 、TX- （support non-standard
DC24V POE）
③ Output port : 485-A：485 connect A port 485-B：485 connect B port
144.00mm 64.00mm
②Network Port
DC+
2
① Power Input
GND