Maintenance / Checking - Samsung ML-2545 User Manual

Warning
Do not place the machine in an area with dust, humidity, or water leaks.
►
Caution
Before moving the machine, turn the power off and
disconnect all cords.
Then lift the machine:
•
1 person.
•
lbs), lift with 2 people.
•
with 4 or more people.
►
The machine could fall, causing injury or machine
damage.
Do not place the machine on an unstable surface.
►
The machine could fall, causing injury or machine
damage.
The machine should be connected to
the power level which is specified on the label.
►
If you are unsure and want to check the power level
you are using, contact the electrical utility company.
Do not overload wall outlets and extension cords.
►
This can diminish performance, and could result in
electric shock or fire.
a. AWG: American Wire Gauge

Maintenance / Checking

Caution
Unplug this product from the wall outlet before cleaning the
inside of the machine. Do not clean the machine with
benzene, paint thinner or alcohol; do not spray water
directly into the machine.
►
This could result in electric shock or fire.
This could result in electric shock or fire.
If the machine weighs under 20 kg (44.09 lbs), lift with
If the machine weighs 20 kg (44.09 lbs) - 40kg (88.18
If the machine weighs more than 40 kg (88.18 lbs), lift
Safety information_ 5
a
Use only No.26 AWG or larger, telephone line cord, if
necessary.
►
Otherwise, it can cause damage to the machine.
Do not put a cover over the machine or place it in an
airtight location, such as a closet.
►
If the machine is not well-ventilated, this could result
in fire.
Make sure you plug the power cord into a grounded
electrical outlet.
►
Otherwise, this could result in electric shock or fire.
Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2
meters (6 feet) with a 110 V machine, then the gauge
should be 16 AWG or larger.
►
Otherwise, it can cause damage to the machine, and
could result in electric shock or fire.
• Do not remove any covers or guards that are
fastened with screws.
• Fuser units should only be repaired by a certified
service technician. Repair by non-certified
technicians could result in fire or electric shock.
►
The machine should only be repaired by a Samsung
service technician.