Printers Configuration; Using The Unified Linux Driver Configurator; Opening The Unified Driver Configurator; Printers Tab - Samsung ML-2545 User Manual

Smart Panel overview
If an error occurs while operating, you can check the error from the Smart
Panel. You can also launch Smart Panel manually.
Double-click the Smart Panel icon (
Toner Level You can view the level of toner remaining in
each toner cartridge. The machine and the
number of toner cartridge(s) shown in the above
1
window may differ depending on the machine in
use. Some machines do not have this feature.
Buy Now You can order replacement toner cartridge(s)
2
from online.
User's Guide You can view the online User's Guide.
This button opens the Troubleshooting
3 Guide when an error occurs. You can
directly open the troubleshooting section
in the user's guide.
Printer Setting You can configure various machine settings in
the Printer Settings Utility window. Some
4
machines do not have this feature.
Changing Smart Panel 's settings
Right-click on the Smart Panel icon and select Configure Smart Panel.
Select the settings you want from the Configure Smart Panel window.

Using the Unified Linux Driver Configurator

The Unified Driver Configurator is a tool primarily intended for configuring
machine devices. You need to install Unified Linux Driver to use Unified
Driver Configurator. (See "Installing the Unified Linux Driver" on page 22.)
After the driver is installed on your Linux system, the Unified Driver
Configurator icon will automatically be created on your desktop.

Opening the Unified Driver Configurator

1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Startup Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
2. Click each button on the left to switch to the corresponding configuration
window.
) in the Notification Area.
2
3
4
1
Management tools_ 40
To use the on screen help, click Help.
3. After changing the configurations, click Exit to close the Unified Driver
Configurator.

Printers configuration

Printers configuration has the two tabs: Printers and Classes.

Printers tab

View the current system's printer configuration by clicking on the
machine icon button on the left side of the Unified Driver Configurator
window.
Switches to Printers configuration.
1
Shows all of the installed machine.
2
Shows the status, model name and URI of your machine.
3
The printer control buttons are, as follows:
• Refresh: Renews the available machines list.
• Add Printer: Allows you to add a new machines.
1 Printers
Configuration
2 Ports
Configuration