Samsung SyncMaster 400P User Manual page 39

Safety Instructions Safety Instructions Safety Instructions
Introduction Introduction Introduction
Connections Package Contents Package Contents
Your LCD Display Your LCD Display
Installing the Stand Kit
Machanical Layout Machanical Layout
Connecting the LCD
Display
Connections Connections
Using the Software Using the Software Using the Software
Adjusting the LCD Display Adjusting the LCD Display Adjusting the LCD Display
Troubleshooting Troubleshooting Troubleshooting
Specifications Specifications Specifications
Information Information Information
Dodatak
Appendix Appendix Appendix
1)
2)
3)
Connections
Note
• Only the supplied bolts should be used.
Caution
Samsung Electronics will not be responsible for damages caused by using a base other than those
specified.
Installing the Semi Stand
A 'Cover-Protector' is used to protect the hole at the bottom of the LCD Display , where the stand is
inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or stand kit (sold
separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit.
Set up the left and right stands respectively.
Insert the stand into the hole at the bottom of the LCD Display.
Insert the screw into the hole indicated and tighten it. (M4 x L15)
Caution
This stand is designed for adjusting the screen angle. The company is not responsible for any problem
caused when using this stand. Under no circumstances use the product as a stand for placing something on.
SyncMaster 400PXn/460PXn
Select Language
Installing the Stand Kit
Left stand
Caution
Make sure to install the stand with the Caution label
folded backwards.
Main Page
Model
Right stand