Table of Contents
Advertisement
P.SCAN
(Progressive Scan)
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire
picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines
displayed in one pass) to create a clear and detailed picture without visible scan lines.
1
Press STOP button.
•
If playing a disc, press the STOP button twice so that "STOP", appears on the display.
2
Press and hold P.SCAN button on the remote control for over 5 seconds.
Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
•
alternately.
•
When you select P.SCAN, "P.SCAN" will appear on the display.
•
To set P.Scan mode for DivX and MP3 discs, press the P.SCAN button on the remote control for more
than 5 seconds with no disc in the unit ("'NO DISC" on the display), then load the DivX disc and play.
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/25th of a second, contains
two interfaced fields, thus a total of 50 fields are
displayed every 1/50th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
•
This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
•
Depending on the capabilities of your TV, this function may not work.
13
Function
Progressive Scan (FULL FRAME)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Switch the system
1
2
Press TIMER/CLOCK
on by pressing
twice.
POWER button.
•
CLOCK is displayed.
When the correct
When the correct
4
5
hour is displayed,
time is displayed,
press ENTER.
press ENTER.
The minutes flash.
•
•
Increase the minutes :
"TIMER" appears in the display.
•
•
Decrease the minutes :
The current time is now set.
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
Press Cursor , ,
1
2
Press ZOOM
, buttons to
button.
move to the area
you want to enlarge.
ENTER ZOOM
POSITION
3
Press ENTER.
The hour flashes.
•
Increase the hours :
•
Decrease the hours :
Note
•
You can display the time, even
when you are using another
function, by pressing
TIMER/CLOCK once.
DVD
3
Press ENTER
button.
•
Each time the button is pressed, the
zoom level changes as follows:
14
Advertisement
Table of Contents
