Setting The Clock; Disc Playback - Samsung MM-DS80M Instruction Manual

Samsung mm-ds80m: instruction manual
Table of Contents

Advertisement

Setting the Clock

For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Switch the system
2
Press TIMER/CLOCK
on by pressing
twice.
POWER button.
CLOCK is displayed.
When the correct
When the correct
4
5
hour is displayed,
time is displayed,
press ENTER.
press ENTER.
The minutes flash.
Increase the minutes :
"TIMER" appears in the display.
Decrease the minutes :
The current time is now set.
Selecting the Video Format
Turn off the main unit and then press NTSC/PAL.
By default, the video format is set to "PAL".
Each time the button is pressed, the video format switches between "NTSC" and "PAL".
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the video format of your TV.
Checking the Remaining Time
Press the REMAIN button.
For checking the total and remaining time of a title or chapter being played.
Each time the REMAIN button is pressed
TITLE ELAPSED
TITLE REMAIN
DVD
CHAPTER ELAPSED
13
CHAPTER REMAIN
3
Press ENTER.
The hour flashes.
Increase the hours :
Decrease the hours :
Note
You can display the time, even
when you are using another
function, by pressing
TIMER/CLOCK once.
TRACK ELAPSED
TRACK REMAIN
VCD
CD
TOTAL ELAPSED
TOTAL REMAIN

Disc Playback

1
Press OPEN/CLOSE button to open the
disc tray.
2
Load a disc.
Place a disc gently into the tray with the disc's label
facing up.
3
Press OPEN/CLOSE button to close the disc
tray.
DVD
Playback starts automatically.
MP3
Playback starts automatically.
If the TV is on, a list of MP3s on
the CD will appear on the TV
screen.
Depending on the content of the disc, the initial screen may appear different.
Note
Depending on the recording mode, some MP3-CDs cannot be played.
Table of contents of a MP3-CD varies depending on the MP3 track format recorded
on the disc.
To stop playback,
press STOP during playback.
If pressed once, "PRESS PLAY" is displayed and the
stop position will be stored in memory. If PLAY/PAUSE
(
) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
If pressed twice, "STOP" is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
VCD
CD
JPEG
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
To temporarily pause playback,
press PLAY/PAUSE during
To resume playback, press PLAY/PAUSE
button again.
14

Advertisement

Table of Contents
loading

Table of Contents