HollyLand LARK C1 Manual

Also See for LARK C1:

User manual (13 pages)

User manual (76 pages)

Table of Contents

Contents

1 PACKING LIST
2 PRODUCT INTRODUCTION
3 PRODUCT INSTALLATION
4 PRODUCT FUNCTION
5 PARAMETERS
6 App
7 SUPPORT
8 Documents / Resources
- 8.1 References
- 8.2 Download manual

HollyLand LARK C1 Manual

PACKING LIST

LARK C1 SOLO (TX*1 to RX*1) to Wireless Microphone System

*The configuration is on the product package and is subject to the actual quantity of equipment purchased

LARK C1 DUO (TX*2 to RX*1) Wireless Microphone System with a Charging Case

*The configuration is based on the product package and is subject to the actual quantity ot equipment purchased

PRODUCT INTRODUCTION

PRODUCT INTRODUCTION - Part 1

TX: Transmitter
PRODUCT INTRODUCTION - Part 2

RX: Receiver
PRODUCT INTRODUCTION - Part 3

PRODUCT INSTALLATION

The TX automatically turns on after it is taken out ot the charging case Simply clip the TX on the cloth
Connect the RX to a mobile phone.
Charge the mobile phone via the RX

PRODUCT FUNCTION

Noise Cancellation Function
- Steady Blue Light: Device connected/Smart noise cancellation off by default
- Steady Green Light: Smart noise cancellation on
  Press the yellow button on the TX to enable the smart noise cancellation function. After the function is enabled, the indicator Iight tums green.
Charging Case Battery Level
- Flashing Light: Charging
- Steady Light: Fully charged
  
  One Indicator Light On 25%
  
  Two Indicator Light On 50%
  
  Three Indicator Lights On 75%
  
  Four Indicator Lights On 100%

Manual Pairing

After the receiver is connected tc the mobile phore, press and hold the button on the TX and the button on the RX for 3s
*The TX RX have been paired with each other in the factory' before shipping. They need ta pair with each other against they are disconnected

PARAMETERS

App

LarkSound
Developed exclusively for Lark Wireless microphones. the LarkSound app is a perfect design to work together with the microphones Various functions, such as smart mode setting. parameter configuration, and firmware upgrade, can be achieved in LarkSound

iOS device version: V12.0 or later

Android device Version: v8.0 or later

SUPPORT

If you encounter any problems in using the product. please contact Hollyland Support Team via the following ways:
Hollyland Products user Group
HollylandTech
HollylandTech
support@hollyland-tech.com
www.hollyland-tech.com

Note:
The frequency range and wireless TX power of the device vary by country and region

Safety Precautions
Do not place the product near or inside heating devices (including but not limited to microwave ovens, induction cookers, electric ovens, electric heaters, pressure cookers, water heaters, and gas stoves) to prevent the battery tram overheating and exploding
Do not use non original charging cases, cables, and batteries with the product
The use ot non original spare parts may cause electric shock, tire, explosion, or other dangers