Advertisement
Quick Links
Advertisement
Related Manuals for Hollyland LARK C1
Summary of Contents for Hollyland LARK C1
- Page 1 User Manual V2.0...
- Page 2 * The configuration is based on the product package and is subject to the actual quantity of equipment purchased.
- Page 3 LARK C1 SOLO (TX*1 to RX*1) Wireless Microphone System Transmitter *1 Receiver *1 USB-A to USB-C Cable *1 ⑦ Furry Windshield *1 Storage Case *1 Warranty Card *1 User Manual *1 * The configuration is based on the product package and is subject to the actual quantity of...
- Page 4 LARK C1 DUO (TX*2 to RX*1) Wireless Microphone System with a Charging Case USB-A to USB-C Cable *1 Charging Case *1 Transmitter *2 Receiver *1 ⑧ ⑦ Furry Windshield *2 Storage Case *1 User Manual *1 Warranty Card *1 * The configuration is based on the product package and is subject to the actual quantity of...
-
Page 5: Product Introduction
PRODUCT INTRODUCTION TX 2 TX 1 RX (Android/iOS) Charging Case Built-in Microphone Power Button * Indicator Light Guide Press and hold the power ●Flashing Blue Light: button for 3s to TX 1 Indicator Device disconnected turn on/off the device. ●Steady Blue Light: Pairing Button Status Indicator Device connected/... -
Page 6: Product Installation
PRODUCT INSTALLATION Connect the RX to a mobile phone. Charge the mobile phone via the RX. The TX automatically turns on after it is taken out of the charging case. Simply clip the TX on the cloth. -
Page 7: Product Function
PRODUCT FUNCTION Noise Cancellation Function Charging Case Battery Level ◆ Flashing Light: Charging ◆ Steady Blue Light: Device connected/Smart ◆ Steady Light: Fully charged noise cancellation off by default ◆ Steady Green Light: Smart noise cancellation on One Indicator Light On Press the yellow button on the TX to enable the smart noise cancellation Two Indicator Lights On function. - Page 8 PRODUCT FUNCTION Manual Pairing After the receiver is connected to the mobile phone, press and hold the ‘ ’ button on the TX and the ‘ ’ button on the RX for 3s. * The TX and RX have been paired with each other in the factory before shipping. They need to pair with each other again if they are disconnected.
- Page 9 Wireless Transmission 2.4GHz Adaptive Frequency Hopping (AFH) Transmission Range 130ft (40m) for NLOS/650ft (200m) for LOS Built-in Microphone Polar Pattern: Omnidirectional Frequency Range: 20Hz–20kHz Maximum SPL 110 dB Input Dynamic Range 86 dB Battery Capacity TX: 140 mAh (0.518 Wh) Charging Case: 1400 mAh (5.18 Wh) Operating Time TX: 8H...
- Page 10 LarkSound Developed exclusively for Lark wireless microphones, the LarkSound app is a perfect design to work together with the microphones. Various functions, such as smart mode setting, parameter configuration, and firmware upgrade, can be achieved in LarkSound. iOS device version: Android device version: v12.0 or later v8.0 or later...
- Page 11 If you encounter any problems in using the product, please contact Hollyland Support Team via the following ways:...
- Page 12 Note: The frequency range and wireless TX power of the device vary by country and region. Safety Precautions Do not place the product near or inside heating devices (including but not limited to microwave ovens, induction cookers, electric ovens, electric heaters, pressure cookers, water heaters, and gas stoves) to prevent the battery from overheating and exploding.
- Page 13 FCC Requirement Note:...
Need help?
Do you have a question about the LARK C1 and is the answer not in the manual?
Questions and answers