Dialing Options - Samsung Rant User Manual

Dialing Options

When you enter numbers in standby mode, you will
see a variety of dialing options displayed as softkeys on
the phone's screen.
To send a message to the number, press
(left softkey).
– or –
To initiate a dialing option, press
and choose one of the following options.
Contact Details: Displays the details for a Contact if the
entered number matches a previously created entry.
Enter a seven-digit or ten-digit number (phone
Save:
number and area code) and press
save the phone number in your Contacts. (See
"Saving a Phone Number" on page 29.)
Send Msg
(right softkey)
Options
to
Options > Save
Hard Pause: Enter digits and then use this feature to
enter a hard pause within a number string (the
phone waits for your input). To continue dialing, you
must press the key. (See "Dialing and Saving
Phone Numbers With Pauses" on page 30.)
Enter digits and then use this feature to
2sec Pause:
enter a 2 second delay within a number string (the
phone continues dialing after 2 seconds without any
additional keys being pressed). (See "Dialing and
Saving Phone Numbers With Pauses" on page 30.)
Tip To speed dial a phone number from standby mode,
press and hold the speed dial number. If the speed
dial number is two digits, enter the first digit, and then
press and hold the second digit. (For information on
setting up speed dial numbers, see "Assigning
Speed Dial Numbers" on page 87.) (This feature will
not work when you are roaming off the Sprint
National Network; when roaming you must dial using
eleven digits [1 + the area code + the seven-digit
phone number].)
Section 2A. Phone Basics 23