Camera Mode Options - Samsung Exclaim User Manual

Camera Mode Options

When the phone is in camera mode, press
(right softkey) to display additional camera options:
Selftimer to activate the camera's timer. (See "Setting
the Selftimer" on page 108 for details.)
to select an option from the following:
Multi Shot
Series Shot to take multiple shots. (See "Taking
Multiple Shots" on page 109.)
to take up to 16 images (4, 9, or 16)
Divided Shot
that are then combined into a single picture.
to select an option from the following:
Fun Tools..
to select your favorite fun picture frame
Fun Frames
to decorate your picture.
(The default setting is
to select a wide variety of color tones
Color Tones
for the picture. (The default setting is
to select an option from
Controls..
, , or
Balance Night Shot
Brightness to adjust the image brightness level.
Press the navigation key up (increase) or down
(decrease) to select a setting.
(The default setting is
108 2I. Camera
Options
.)
None
None
,
Brightness White
.
Metering
.)
0
White Balance
changing conditions (
Fluorescent,
Night Shot
Enabling this feature allows you to take better
quality photos in low light conditions.
Metering
being photographed and then determine the best
light levels. Choose from either
area of the image) or
sampled and then an average reading is used).
to select
Settings..
or
Status Bar
Launch to review pictures or launch the camcorder.
Setting the Selftimer
1. From camera mode, press
.)
Selftimer
2.
Highlight the length of delay you want the timer to
use (
5 Sec
(The default setting is
to adjust white balance based on
Auto, Sunny, Cloudy, Tungsten,
or ). (The default setting is
Manual
to activate low light image capture.
to allow the phone to sample the area
(the entire image is
Average
,
Resolution Quality
. (See page 110 for details.)
Storage
Options
.
or ) and press
10 Sec
.)
Off
.)
Auto
(a specific
Spot
, ,
Shutter Sound
(right softkey)
>
.