SMC Networks TigerSwitch SMC6128PL2 Management Manual page 460

C L
OMMAND INE
option is only available for version 2c and 3 hosts. (Default: traps
are used)
- retries - The maximum number of times to resend an inform
message if the recipient does not acknowledge receipt. (Range:
0-255; Default: 3)
- seconds - The number of seconds to wait for an acknowledgment
before resending an inform message. (Range: 0-2147483647
centiseconds; Default: 1500 centiseconds)
-community-string - Password-like community string sent with the
notification operation to SNMP V1 and V2c hosts. Although you
can set this string using the snmp-server host command by itself,
we recommend that you define this string using the snmp-server
community command prior to using the snmp-server host
command. (Maximum length: 32 characters)
-version - Specifies whether to send notifications as SNMP Version 1,
2c or 3 traps. (Range: 1, 2c, 3; Default: 1)
- auth | noauth | priv - This group uses SNMPv3 with
authentication, no authentication, or with authentication and
privacy. See "Simple Network Management Protocol" on page 5-1
for further information about these authentication and encryption
options.
-port - Host UDP port to use. (Range: 1-65535; Default: 162)
Default Setting
•Host Address: None
• Notification Type: Traps
•SNMP Version: 1
•UDP Port: 162
Command Mode
Global Configuration
Command Usage
4-142
I
NTERFACE