BOGASING M4 Manual

Specifications

Accessories

Button Configuration

1. Status indicator light
2. TWS indicator light
3. Sound effect indicator light
4. Volume down/ Previous track
5. Play/Pause/Answer/End a call
6. Volume up/Next track
7. Activate the phone voice assistant
8. Power ON/OFF
9. Switch modes/Reset
10. Switch Sound effects
11. USB-C charging port
12. TF-card slot
13. Aux-in port

BUTTON	OPERATION	FUNCTION DESCRIPTION
	Press and hold	Turn ON/OFF.
	Press twice quickly	Enter into True Wireless Stereo (TWS) mode.
	Press	Switch the playing modes (Bluetooth, USB-C, A ux-in or TF-card)
	Press and hold	Clear all paired devices or restore to factory settings.
	Press	Play/Pause. Answer the incoming calls. End the current cal
	Press twice quickly	Call back the last call.
	Press and hold	Disconnect the bluetooth device. Decline an incoming call
	Press	Switch 3D, Vocal, and Super Bass mode in turn.
	Press	Volume down, total 16 levels
	Press and hold	Previous track
	Press	Volume up, total 16 levels
	Press and hold	Next track
	Press	Activate the phone voice assistant

Multiple Play Modes

1. This speaker supports up to 64GB TF-card; Supports music format: APE/FLAC/WAV/MP3.
2. Insert the TF card into the slot and automatically play the audio file in order after recognition.
3. Press the " " button to switch the playing mode to Bluetooth, Aux-in, USB-C or TF-card.

Note: Please use a cable which supports audio transmission when you using a USB-C play mode.

LED Indicator

Status indicator

1. Bluetooth light
   Ready to connect: Blinking blue; Connected: Glows solid blue.
2. Play modes light
   AUX/TF card mode: Blue light is slow blinking; USB-C mode: Red and purple lights blinking alternately.
3. Charging indicator light
   Solid red light: Charging. Red light goes off: Fully charged (When power is off and the adapter must be at least 5V/2A).

TWS LED indicator

1. Ready to pair another speaker: Blinking orange light
2. Two speakers are paired: Solid orange light

Sound effects indicator

3D: Light goes off

Vocal: Solid white light

Super Bass: Solid green light

TWS Pairing

1. Make sure both speakers are powered on and they are disconnect with other devices.
2. Press the " " button twice quickly on one of the speakers to enter TWS pairing mode. At this time, the orange indicator light Of this speaker is blinking.
3. After two speakers are paired, you will hear a beep. At this time, the orange indicator lights Of two speakers are solid.
4. Turn on the Bluetooth function of your cell phone or other devices, find and connect the speaker named of "BOGASING-M4".
5. After the two speakers are successfully paired, it will automatically enter the TWS mode next time turning ON, no need to re-pair.
6. If the speaker ever paired with other speaker, Please press and hold the " " button to reset it. Restart the speaker after reset, and then refer to steps 1-4 to enter the TWS pairing.
7. In TWS mode, only one speaker can be use for hands-free calling when incoming calls, the other speaker no sound.
8. In TWS mode, you can still switch the sound effects through pressing "" button.

If you have any other questions or comments, please contact us by email: bogasing@hotmail.com

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download BOGASING M4 Manual