Table of Contents
Advertisement
System settings
1. From the pattern or song play screen,
press [EDIT].
The edit menu screen appears.
2. Move the cursor to the "FOOT SWITCH"
icon, and press [ENTER].
The Foot Switch setting screen appears.
fig.07-090d
3. Move the cursor to Sw.1–4, and use the
VALUE dial to choose the function that
you want to assign to each foot switch.
Value
The same function as pressing
START
[
The same function as pressing
STOP
[
The same function as pressing
RESET
[
Pattern/song playback will alter-
nately start or stop each time you
START/STOP
press the foot switch. Playback will
start from the point at which it was
stopped.
Pattern/song playback will alter-
nately start or stop each time you
RST+STA/STP
press the foot switch. Playback will
start from the beginning of the pat-
tern or song.
You can input Tap Tempo by press-
TAP TEMPO
ing the foot switch at the desired in-
terval.
The same function as pressing
LOOP
[LOOP].
Switch to the pattern or song of the
PTN/SNG INC
next number.
Switch to the pattern or song of the
PTN/SNG DEC
preceding number.
* If you press the switch while a pattern or song is playing,
the next selected pattern or song will start playing after
the current pattern or song has finished playing.
Switch the guitar effect on/off.
G.FX ON/OFF
Switch to the effect patch of the next
G.FX Pt. INC
number.
122
Explanation
].
].
].
Value
Switch to the effect patch of the pre-
G.FX Pt. DEC
ceding number.
The same function as pressing FA-
FAVORITE 1–4
VORITE [1]–[4].
Switch to the FAVORITE registra-
FAVOR. INC
tion of the next number.
Switch to the FAVORITE registra-
FAVOR. DEC
tion of the preceding number.
Switch to the FAVORITE bank of
FAV.BNK.INC
the next number.
Switch to the FAVORITE bank of
FAV.BNK.INC
the preceding number.
Pressing the foot switch will have
the same result as striking the key
pad of the corresponding pad
BANK1 PAD01–
bank/number.
BANK3 PAD20
Move the cursor to "V" and specify
the velocity (1–127) at which the
note is to be played.
4. When you've made the setting, press
[EXIT].
The message "Now writing..." will appear,
and the currently settings will be saved.
When the currently settings have been saved,
the message will disappear.
* Do not turn off the power while the message is displayed.
Your data may be damaged if you do so.
Explanation
Advertisement
Table of Contents
