Speaker Modeling Parameter Functions; Sp Modeling (Speaker Modeling); On/Off Off, On - Boss BR-1200CD Owner's Manual

Speaker Modeling parameter functions

This effect simulates the response of a wide variety of
speakers, ranging from high-quality professional monitor
speakers used in studios around the world to speakers from
compact televisions or portable radios.
fig.37-13d
SP Modeling
Bass Cut Filter
Low Freq Trimmer
High Freq Trimmer
Limiter

SP Modeling (speaker modeling)

On/Off
Turns speaker modeling on or off.
Model
Selects the speaker whose characteristics you wish to simulate.
No modeling will be performed.
Thru
Modeling will be used to compensate
for the DS-90A, DS-50A, or DS-30A
SprFlat
monitors, giving the sound an even
wider range and flatter response.
A standard-model powered monitor
Pwd. BLK (two-way type, woofer diameter = 170
mm (or 6 1/2 inches)).
Powered monitors characterized by a
Pwd. E-B
bright tone.
Powered monitors characterized by an
Pwd. MAC
extended low range.
Small full-range speakers widely used
SmlCUBE
in recording studios.
A sealed two-way speaker widely used
in recording studios and characterized
Wh.CONE
by its white woofer.
A milder tone achieved by covering the
WhTISUE tweeters of Wh.CONE speakers with
tissue paper.
Radio A small pocket-type radio.
SmallTV The speakers of a 14-inch television.
BoomBox A radio-cassette recorder.
A radio-cassette recorder with its Low
BoomLoB
Boost function turned on.
Output Sp.
This parameter is used to specify the actual type of speaker
connected to the BR-1200CD.
DS-90A speakers are connected.
DS-90/A:
DS-50A: DS-50A speakers are connected.
DS-30A: DS-30A speakers are connected.
CM-30: CM-30 speakers are connected.
Phase
Specifies the phase of the speakers.
The output phase will be the same as that of the
NORMAL:
input.
INVERSE: The output phase will be the opposite to that of the
input.
OFF, ON
313