Roland KR-5 Owner's Manual page 114

Chapter 5 User Program Registration
Determining the save destination
6.
Touch <Disk> or <User>. (KR-7)
Touch <Disk> if you are saving to a floppy disk; touch
<User> if you are saving to user memory.
7.
Touch to select the save-destination User
Program number.
If a User Program set name is displayed, a User Program
set saved to that saved to that number is already.
If you select a number with previously saved User
Program set data, then save a new set of data to that
same number, the older User Program set will be
deleted. If you don't want to lose any previously saved
User Programs, select a number in the save-destination
column that does not yet have a name.
Save
8.
Touch <Save> to begin the save.
Touch <Exit> to return to the User Program File screen.
* Never turn off the power or eject the floppy disk from the disk
drive while the operation is in progress. Doing so will damage
the KR-7/5's internal memory, making it unusable.
→ When clearing the set of saved User Programs, refer to
"Deleting Saved User Program Sets" (p. 115).
114
■ Loading Saved User Program
Sets
User Programs that have been saved on floppy disks or in
user memory (KR-7) can be called up, on an individual set
basis, to the [User Program] button.
* Note that calling up these User Programs results in the
deletion of all User Programs currently recorded to the [User
Program] button.
When loading a set of User Programs from a floppy disk,
first insert the floppy disk in the disk drive.
→ For more on working with the disk drive, refer to "Using
Floppy Disks" (p. 104).
1.
Press the [User Program] button.
2.
Touch <File>.
3.
Touch <Load>.
A "Load User Program screen" like the following
appears.
fig.d-upgload.eps_50
Specifying the set of User Programs to be
loaded
4.
Touch < (Disk)> or <
Touch < > if you are loading User Programs from a
floppy disk; touch <
Programs from the user memory.
5.
Touch the name of User Program to load.
6.
Touch <Load>.
The confirmation message appears.
7.
Touch <OK>.
The selected User Programs are loaded to the [User
Program] button.
* Never turn off the power or eject the floppy disk from the disk
drive while the operation is in progress. Doing so will damage
the KR-7/5's internal memory, making it unusable.
Display of
the KR-7
(User)>. (KR-7)
> if you are loading User