Advertisement
Quick Links
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COULD
RESULT IN SERIOUS INJURY OR DEATH
•
READ ALL INSTRUCTIONS BEFORE STARTING
INSTALLATION
STEP 1.
Remove the table lamp and parts from the Carton.
STEP 2.
Attach the glass shade onto the socket, then secure it with
thumb screws.
STEP 3.
Install the Lamp. This fixture is rated for 7 watt LED type T
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
THUMB SCREW
GLASS
LAMP
BASE ASSEMBLY
www.hudsonvalleylighting.com/mitzi| #mymitzi
HL527401 NETTIE TABLE LAMP
INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN
FOUND.
lamp. DO NOT EXCEED RECOMMENDED WATTAGE
STEP 4.
Plug cord into a qualified socket of properly rated voltage.
STEP 5.
On/Off switch installed on cord.
PLUG
Advertisement
Related Manuals for HUDSON VALLEY LIGHTING mitzi NETTIE
Summary of Contents for HUDSON VALLEY LIGHTING mitzi NETTIE
- Page 1 HL527401 NETTIE TABLE LAMP ASSEMBLY AND MOUNTING INSTRUCTIONS GENERAL INSTALLATION. • WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER • BEFORE DISCARDING THE CARTON DOUBLE CHECK THE MAINTENANCE. PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
- Page 2 HL527401 NETTIE TABLE LAMP www.hudsonvalleylighting.com/mitzi| #mymitzi...
Need help?
Do you have a question about the mitzi NETTIE and is the answer not in the manual?
Questions and answers