Advertisement
Available languages
Available languages
Table of Contents
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFLORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COULD RESULT IN
SERIOUS INJURY OR DEATH
INSTALLATION
STEP 1.
Remove the table lamp and parts from the Carton.
STEP 2.
Insert harp onto the saddle.
STEP 3.
Install the Lamp. This fixture is rated for 40 watt TYPE A
lamp.
DO NOT EXCEED RECOMMENDED WATTAGE
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
www.hudsonvalleylighting.com/mitzi| #mymitzi
HL268201 BRYNN TABLE LAMP
•
READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
STEP 4.
Place shade onto harp then secure it with finial .
STEP 5.
Plug cord into a qualified socket of properly rated
voltage.
STEP 6.
On/Off switch installed on cord.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HUDSON VALLEY LIGHTING mitzi BRYNN
Summary of Contents for HUDSON VALLEY LIGHTING mitzi BRYNN
- Page 1 HL268201 BRYNN TABLE LAMP ASSEMBLY AND MOUNTING INSTRUCTIONS GENERAL • • WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION. POWER OFF BEFLORE INSTALLING, CLEANING, OR OTHER • BEFORE DISCARDING THE CARTON DOUBLE CHECK THE MAINTENANCE. PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
- Page 2 HL268201 BRYNN TABLE LAMP NOTICE D'ASSEMBLAGE ET DE MONTAGE GENERALITE • • AVERTISSEMENT – TOUJOURS DÉBRANCHER LA LAMPE À LA VEUILLEZ LIRE TOUTE LA NOTICE AVANT DE PROCÉDER À PRISE AFIN DE COUPER INTÉGRALEMENT LE CIRCUIT L'INSTALLATION. ÉLÉCTRIQUE AVANT D’INSTALLER, DE NETTOYER OU •...
Need help?
Do you have a question about the mitzi BRYNN and is the answer not in the manual?
Questions and answers