Advertisement
Available languages
Available languages
Quick Links
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BELORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COULD RESULT IN
SERIOUS INJURY OR DEATH
INSTALLATION
STEP 1.
Remove the table lamp and parts from the Carton.
STEP 2.
Unscrew the ring to release the glass fitter.
STEP 3.
Install the Lamp. This fixture is rated for 40 watt type A
lamp.
DO NOT EXCEED RECOMMENDED WATTAGE
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
www.hudsonvalleylighting.com/mitzi| #mymitzi
HL289201 BRIELLE TABLE LAMP
•
READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
STEP 4.
Tilt and rotate the glass shade so that the glass holder
into glass shade. Drop glass fitter and secure with the
ring.
STEP 5.
Plug cord into a qualified socket of properly rated
voltage.
STEP 6.
On/Off switch installed on cord.
Advertisement
Related Manuals for HUDSON VALLEY LIGHTING mitzi BRIELLE
Summary of Contents for HUDSON VALLEY LIGHTING mitzi BRIELLE
- Page 1 HL289201 BRIELLE TABLE LAMP ASSEMBLY AND MOUNTING INSTRUCTIONS GENERAL • • WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION. POWER OFF BELORE INSTALLING, CLEANING, OR OTHER • BEFORE DISCARDING THE CARTON DOUBLE CHECK THE MAINTENANCE. PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
- Page 2 HL289201 BRIELLE TABLE LAMP NOTICE D'ASSEMBLAGE ET DE MONTAGE GENERALITÉ • • AVERTISSEMENT – TOUJOURS DÉBRANCHER LA LAMPE À LA VEUILLEZ LIRE TOUTE LA NOTICE AVANT DE PROCÉDER À PRISE AFIN DE COUPER INTÉGRALEMENT LE CIRCUIT L'INSTALLATION. ÉLÉCTRIQUE AVANT D’INSTALLER, DE NETTOYER OU •...
Need help?
Do you have a question about the mitzi BRIELLE and is the answer not in the manual?
Questions and answers