Table of Contents
Advertisement
Chapter 3
Using IntroScan
IntroScan plays the first ten seconds of each track on the CD – similar to the scan feature that's on
many car radios. To use IntroScan:
1. Press INFO on the remote (the Info Display appears).
2. Highlight the IntroScan icon. Press OK. The first ten seconds of each track will play.
•
After IntroScan goes through all of the tracks, it stops.
•
If you want to stop IntroScan while it's in progress, press PLAY on the remote. The current
track starts playing in its entirety.
•
You can also access IntroScan from the Play Mode menu in the DVD Player's main menu.
Using Bookmarks
The bookmark feature lets you mark a point on the disc that you can go to quickly. You can store
up to 6 bookmarks per disc. When you turn the player off or remove the disc, bookmarks are
cleared.
Storing a Bookmark
1. While a disc is playing, press INFO on the remote.
2. Highlight the Bookmark icon and press OK.
3. The Bookmark Menu appears. An available Unmarked icon will be highlighted (a disc icon
with two arrows).
4. When you reach the place you want to mark, press OK. The unmarked icon changes to two
icons (side-by-side):
• An arrow that is used to activate the bookmark.
• A trashcan that can be used to clear the bookmark.
Next to the icons the bookmark start time and track are displayed.
5. Press the INFO button on the remote to make the Info Display disappear from the screen.
Using a Bookmark
1. While you're playing a disc, press INFO on the remote. The Info Display appears.
2. Highlight the Bookmark icon and Press OK. The Bookmark menu appears.
3. Highlight the arrow next to the bookmark you want to activate.
6. Press OK to activate the bookmark.
7. To make the Info Display disappear from the screen, press INFO on the remote.
Playing Audio CDs
35
Advertisement
Table of Contents
