Using A Disc Menu - RCA RC5215P User Manual

To Load and Play a Disc
Turn on the TV and your DVD Player (press ON•OFF on the player or press the POWER button
on the remote control).
This is an example of
a one-sided disc.
This is an example of
a 2-sided disc. The
title is in the center.

Using a Disc Menu

A disc is capable of having an on-screen menu that is separate from the DVD player's menu
system and on-screen Info Display. The disc menu might only contain a list of the titles and
chapters, or it may allow you to change features such as language and playback settings.
Although the content and operation of disc menus varies from disc to disc, the following example
will give you an idea of what to expect.
An example of a disc menu. The menus
on discs vary because the disc menu is
created by the disc's author.
Chapter 2
1. Press the OPEN•CLOSE button on the front of the DVD Player or
press and hold the STOP button on the DVD remote. The disc tray
opens.
2. Place a disc gently into the tray with the disc's label facing up
(double-sided discs have content on both sides, so you can place
either side up).
3. Press the OPEN•CLOSE or PLAY button. The disc tray closes.
The DVD Player reads the disc's table of contents, and then one of
three things happens depending on how the disc was programmed:
• The disc starts playing.
• The disc menu appears on the screen. One of the options will
start disc play. Highlight that option and press OK.
• The DVD Player's main menu appears on the screen. Highlight
the Play option and press OK.
When you stop playing a disc, the player remembers where you
stopped. When you start playing the disc again, the DVD Player picks up
where you left off unless the disc is removed or the player is unplugged,
or if you press the STOP button twice.
1. While the disc is playing, press MENU.
The disc menu appears.
Playing DVDs
Tip
Many discs skip the disc
menu and start playing
automatically. To access
the disc menu when
you're playing a disc,
press MENU on the
remote.
21