RODE NT-USB+ - Microphone Manual

OPERATION

1. Place the ring of the pop filter around the base of your NT-USB+
2. Screw the thread on the base of your NT-USB+ into the ring mount until the microphone and pop filter are secure
3. Screw the included tripod into the other side of the ring mount and position it so the microphone can sit stably on your desk
4. Connect the included USB cable into the underside of the NT-USB+ to connect it to your computer, tablet or phone
5. Ensure the upper knob is turned up halfway, and the lower knob is fully counterclockwise
6. Connect headphones to the 3.5mm output beneath the knobs, then slowly increase the lower knob until you can comfortably hear your voice
7. Adjust the upper knob to balance the volume of your voice and audio coming from your computer, tablet or phone

Download RØDE Central to apply processing, change settings and update your firmware rode.com/apps/rode-central

OVERVIEW

SCAN FOR MORE INFO