Ecosense EcoQube, EQ100 - Ion Chambe Manual

Also See for EcoQube:

User manual (8 pages)

Table of Contents

Contents

1 Introduction
2 In the box
3 EcoQube Set Up
4 EcoQube
5 EcoQube App Overview
6 EcoQube Placement Guidelines
7 Technical Specifications
8 Maintenance
9 Customer Support
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Ecosense EcoQube, EQ100 - Ion Chambe Manual

Introduction

At Ecosense, we are solely dedicated to developing innovative and highest performance radon gas monitoring solutions that ensure accurate and real-time reporting of indoor air safety levels for your family. Our real-time radon monitoring solution, EcoQube, integrates the latest high precision patented radon monitoring technology combined with wireless and cloud connectivity to deliver an easy to use, fast, highly accurate, compact, and affordable continuous radon monitoring solution.

In the box

EcoQube Set Up

Connect the large end of power cable into the power adapter. Then plug the power adapter into an AC power supply.
Download and open the EcoQube app (Available in App store and Google play).

Register and create your account.
Follow instructions in the app.

EcoQube

Overview

EcoQube App Overview

The EcoQube App connects with the intelligent EcoQube radon detector device. It gathers all data from the EcoQube detector device to be shared with your smartphone.

EcoQube Placement Guidelines

Make sure it's at the right height. Place EcoQube at least 20 inches (50cm) above the floor. Do not p ace EcoQube close to open windows or vents and keep it away from high heat, high humidity.
Find a spot with a good Wi-Fi signal. EcoQube uses Wi-Fi together with an internet connection to send information to your smartphone app.

Technical Specifications

Type	Pulsed Ion chamber
Radon sensitivity	30 cph (count per hour) per 1 pCi/L (37 Bq/m³)
First reliable result	Within an hour
Accuracy/Precision (95% Confidence)	< ±10% at 10 pCi/L (370 Bq/m³) after 10 hours
Data display update	10 minute interval (60 minutes moving average)
Operating temperature range	32°F~104°F (0~40°C), Relative Humidity < 80%
Measurement range	0.2 - 99.9 pCi/L (7-3,700 Bq/m³)
Power supply	DC 5V, 200mA (5V 1A DC Adapter)
Dimensions	2.56 x 2.56 x 3.17 in. (65 x 65 x 80.5 mm)
Weight	0.243 Lbs (110g)
Connectivity	Wi-Fi 802.11 b/g/n (2.4 GHz), Bluetooth v4.2

Maintenance

Reset to device settings: Resets Wi-Fi settings, alarm settings, and unit settings to default values.

Press button until LED goes off.
Keep holding the reset button for 5 seconds until the LED turns green.
Release the button.

Reset to factory settings: Resets to original manufacturer settings if device becomes unresponsive.

Press button until LED is off.
Press and hold the reset button for 5 seconds until the LED turns green.
Keep pressing and hold the reset button for more than 20 seconds until the LED turns orange.
Release the button.

Powering off

To switch off the EcoQube device, please remove the power cable from the back side.

Reset existing data

To erase all data on your account, you need to unregister the EcoQube by following the below steps. Go to All Devices and swipe left on the device name to show the Unregister menu.