Pogo TSR-500 User Manual page 14

TSR-500 User Manual
3.3 Key Actuation Tones
The default setting of "Key Tone" is [ON].
The touch tone sound is emitted with each key actuation.
(In other words, the unit beeps each time you press a Hard
or Soft Key.)
1) Press the touch-tone [ON] Soft Key to set it to "OFF"
(non-beeping).
2) Press the touch-tone [OFF] Soft Key to turn it [ON] again
(beeping).
3.4 All Power Setup
To access this function, you need to be in Setup Mode and have
selected the[all POWER] Soft Key.
Select all of the devices you wish to be controlled by
[all POWER] Soft Key and then the dot marks will be displayed
next to each device selected . If you select the wrong device,
just press the device Soft Key once more and the device dot mark
will be gone. When the [all POWER] Soft Key is pressed,
the power codes for the all pre-selected devices will be transmitted
14