Pogo TSR-500 User Manual page 10

TSR-500 User Manual
set up the controls.
4) Press the [SETUP] Soft Key on left side of LCD touch panel.
This puts your remote in SETUP mode.
Note: In SETUP Mode, you can program the code,
learn the code, change the label, set up the MyPick,
set up the Key mirror and change the configuration.
5) next, touch the [CONFIGURATION] Soft Key, which gives
you six configuration modes. This mode lets you
change preferences such as LCD off time, key tones on/off,
all POWER setup and Default setting (see diagram below)
10