Established Call Pickup; Appointment Reminder/Alarm Clock; Executive/Secretary Hot Line; Group Listening - DCS 7B User Manual

400si keyset
Table of Contents

Advertisement

ESTABLISHED CALL PICKUP

To pick up an established call in progress at a single line extension connected
to a computer modem on your PC.
Press the EP key for that station on your keyset and the call is automati-
cally moved to your keyset.
The single line extension on your modem will be disconnected.
NOTE: You must have an assigned (EP key) button on your regular keyset, for
the single line station.
APPOINTMENT REMINDER/ALARM
CLOCK
This feature works like an alarm clock. Use it to remind yourself of an appoint-
ment later in the day (TODAY ONLY) or as a daily reminder every day (DAILY).
You can set up to three alarms. Each one can be either a TODAY ONLY or a
DAILY alarm.
When the alarm rings, you will hear three short rings repeated three times. Lift
the handset to answer the alarm. If you do not, the alarm will alert you two more
times at five minute intervals.
To set alarms:
Press TRSF and then dial 112.
Dial the alarm number 1, 2 or 3.
Dial the time at which you want the alarm to sound. Enter the time as HHMM
(hours and minutes) using the 24 hour clock.
Dial 0 (NOT SET), 1 (TODAY ONLY) or 2 (DAILY) to select the alarm type.
Press TRSF to save.
Repeat for each alarm if needed.
To cancel individual alarms:
Press TRSF and then dial 112.
Dial alarm number 1, 2 or 3.
Press the HOLD key.
NOTE: Display keysets can show a reminder message. See Alarm Reminder
Messages under Display Features .
32
ANSWERING THE DOOR PHONE
When you are programmed to receive calls from a door phone:
You will receive three short rings repeated.
Lift the handset or press ANS/RLS or the MONITOR key. You are connected
to the door phone.
If an electric door lock release is installed, dial 13 to unlock the door.
CALLING THE DOOR PHONE/ROOM
MONITOR
You may call the door phone and listen to what may be happening outside or in
another room.
Dial the extension number of the door phone.
You will be connected to the door phone and you can listen or have a conver-
sation.
If an electric door lock release is installed, dial 13 to unlock the door.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press SPK or the MONITOR key.

EXECUTIVE/SECRETARY HOT LINE

If programmed, an executive and a secretary can have a hot line between them.
When the executive station is in the DND mode, all of its calls will ring the
secretary station.
Either person can press the BOSS key to make a voice call to the other
station.
Using the hot line will override DND at the other station. This key will light red
when the other station is in use.
To transfer a call to a Boss in DND:
Press the TRSF key followed by the BOSS key.
Wait for the BOSS station to answer to announce the call and hang up to
complete the transfer OR
Hang up to complete a blind transfer after pressing the BOSS key.

GROUP LISTENING

When you are engaged on a call and you are using the handset, you may want
other people to hear the distant party's voice over the speaker:
33

Advertisement

Table of Contents
loading

Related Products for DCS 7B

This manual is also suitable for:

Lcd 12bLcd 24bStd 24bBasic 12b

Table of Contents

Save PDF