System Off; Using System Off - Pioneer Elite VSX-55TXi Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for Elite VSX-55TXi:
Table of Contents

Advertisement

System Off

The SYSTEM OFF feature allows you to tell the receiver and your other components to stop and/or turn off with the
push of only one button on the remote control. The steps below show you how to program a string of up to 5
different SYSTEM OFF operations. Be sure to set up each component before programming the SYSTEM OFF
function (see "Setting Up the Remote Control to Control Other Components" on page 63).
Memo:
To exit from the REMOTE SETUP mode at
anytime press the REMOTE SETUP button.
The display will disappear after one minute or
so if no new commands are entered. Press
any button to wake up the remote and
continue the process.

Using SYSTEM OFF

Press the SYSTEM OFF button. All Pioneer components and all components programmed into the SYSTEM OFF
mode will stop and/or go off.
1 Press the REMOTE SETUP button for
more than three seconds.
The REMOTE SETUP menu appears on the remote
display.
SYSTEM OFF
2 Use the  buttons to select SYS OFF
and press ENTER.
SYSTEM OFF appears in the remote display.
3 Use the  buttons to select first
command. "1st Cmmnd" appears in
the display. Press ENTER.
This tells the receiver this will be the first command.
To erase a command
Select CLEAR and press ENTER. Then go to step 7.
Buttons that
To go back one step
can be
Select EXIT and press ENTER.
programmed
to do
SYSTEM OFF
4 To setup a command select CHANGE
Operations
and press ENTER.
FUNCTION flashes in the display,
5 Select the component whose
command you want to input, and
press the MULTI CONTROL button for
it.
KEY will flash in the display.
6 Select a button for the command you
want to input.
COMPLETE appears in the display.
7 Repeat steps 3-6 to program up to
five commands.
You can assign SYSTEM OFF information for up to 5
commands.
8 When done select EXIT and press
ENTER.
You will return to the REMOTE SETUP menu.
9 Select a EXIT and press ENTER again.
You will exit the REMOTE SETUP menu and return to
normal operation.
Using Other Functions
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents