Blurams S20C - Omni Outdoor Camera Manual

Packing list

Get to know your camera

1. Antenna
2. Indicator light
3. Spotlight
4. Lens
5. Microphone
6. Speaker
7. Reset button
8. TF card slot
9. Power port
10. LAN port

Plug in your camera

For the normal operation Of the camera, please use the provided power cord to charge it. The camera has a power port and a LAN port. Waterproofing done on both of these ports.

1. Wrapping with the waterproof tape.
2. Wrap the power port with waterproofing tape (not included).
3. Sealed with the rubber waterproof seal.
4. Wrap the LAN port with the waterproofing tape (not included) or the waterproofing case.

Download blurams App

Add your camera into App

Enter into the blurams App, sign up for a free blurams account and log in. Go to the home page and Click the "+" icon on the top right corner, select your camera. Please follow the instruction on the App interface to add your camera.

Use of access to the cameras via a web interface

After you have installed the camera on your mobile phone and created an account with blurams there, you can also access the camera via a browser (Chrome, Firefox, Edge). Please enter the following address in the address line: https://client.blurams.com/login
Enter your registered email address, password and a verification code. Click on your camera and the live image will appear. At the top right you will find a gear symbol. If you click on it you can change the settings of the camera and see the recordings made.

Customer Service

+1 (855) 917 4591
(Mon-Fri 08:00 AM - 05:00 PM Pacific Time)

support@blurams.com

• After finishing the camera setup under the 2.4GHz Wi-Fi connection for the first time, you can try to use an Ethernet cable to get a better and more stable network connection.
• Do not use the camera in any extreme weather environments such as extremely high, low temperatures, direct strong sunlight, or heavy rain for long periods of time. The suitable temperature for the product and accessories is -20 ℃ to 60 ℃.
• If you use a third-party charger, the recommended output voltage/current of the adaptor is DC12V/1A, and the adapter should be CE approval type.
• RF Exposure Information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20cm between the device and the human body. To maintain compliance with RF exposure requirements, use products that maintain a 20cm distance between the device and the human body.
• Operating Frequency Range: 2412 MHz ~ 2472 MHz Max Output Power: < 20dBmThis product can be used across EU member states.

Documents / Resources

References

• https://client.blurams.com/login
• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Blurams S20C - Omni Outdoor Camera Manual