Aspect; The Auto Power Down Menu; The Fl Demo Mode Menu - Pioneer VSX-921-K Operating Instructions Manual

The System Setup menu

Aspect

Specifies the aspect ratio when analog video input signals
are output at the HDMI OUT terminal. Make your desired
settings while checking each setting on your display (if the
image doesn't match your monitor type, cropping or black
bands appear).
1
Select 'Video Parameter' from the System Setup menu.
2
Select 'Aspect' from the Video Parameter menu.
5c.Aspect
5.Video Parameter
a.Video Converter DVR/BDR
DVD
b.Resolution
BD
c.Aspect
VIDEO1
Return
3
Select desired output aspect ratio.
• THROUGH – The input video signal is output unchanged.
• NORMAL – Black bands will appear either at top and
bottom or on both sides.
4
When you're finished, press RETURN.
You return to the Video Parameter menu.
Note
• If the image doesn't match your monitor type, adjust the
aspect ratio on the source component or on the monitor.

The Auto Power Down menu

Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours.
• Default setting: OFF
1
Select 'Auto Power Down' from the System Setup
menu.
System Setup
1.Auto MCACC
2.Manual SP Setup
NORMAL
3.Input Assign
[T HROUGH]
4.Speaker System
[T H ROUGH ]
5.Video Parameter
[ N ORMAL ]
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
Return
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
• You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3
When you're finished, press RETURN.
You return to the System Setup menu.

The FL Demo Mode menu

Set whether or not various demos are to be shown on the
front panel display.
1
Select 'FL Demo Mode' from the System Setup menu.
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Speaker System
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
2
Choose ON or OFF for the demo display.
3
When you're finished, press RETURN.
You return to the System Setup menu.
7.Auto Power Down
OFF
Return Return
8.FL Demo Mode
FL Demo ON
Return
Return
06
06
41
En