Philips 32PFL3505D User Manual page 18

Using your TV as a PC monitor
Use an HDMI-DVI cable or an HDMI-DVI adaptor to connect a PC to
your TV. For sound, add an audio cable with a stereo mini jack.
Caution
•
Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Supported screen resolutions
The following screen resolutions are supported in PC mode:
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 768
1360 x 768
Changing sound settings
1
Press MENU on the remote control and select [Sound].
Picture Auto Sound
Sound Equalizer
Setup Vir tual Surround Sound
Features Auto Volume Leveling
Language
TV Speakers
Audio Setting
2
Press Î or ï to highlight a sound setting and press OK to select
the setting.
3
Adjust the following items.
[Auto Sound]
Press Î or ï to select the desired setting, then press OK.
([Personal], [Standard], [Movie], [Music] and [News])
[Equalizer]
Adjust tone quality for each frequency.
Press Í or Æ to select the specifi c frequency, then press Î or ï to
adjust the level.
[Virtual Surround Sound]
This selects the modes for more spatial or surround sound reproduction.
Press Î or ï to select the desired option, then press OK.
On
The Virtual Surround Sound will be effective.
Off
The original sound will be output.
[Auto Volume Leveling]
Auto Volume Leveling keeps a constant loudness differential
between the TV commercials and the programs.
Press Î or ï to select the desired option, then press OK.
Select if you want to reduce volume differences
On
between the TV commercials and the programs.
Select if you want to invalidate the Auto Volume
Off
Leveling.
Refresh rate
60Hz
60Hz
60Hz
60Hz
60Hz
Standard
On
Off
Speakers EasyLink
Stereo
[TV Speakers]
This option will allow you to select the audio output from the
unit's speakers. If you have an amplifi er which is compatible with
the CEC function connected to this unit using an HDMI cable,
some sound operations such as volume up can be used with this
unit's remote control.
to select the desired option, then press OK.
Press or
On Sound will come from the TV's speakers.
Off No sound will come from the TV's speakers.
This function allows you to control audio output
Speakers
from EasyLink compliant device with the TV's remote
Easy Link
control.
[Audio Setting]
You can set the output mode as a default for the sound mode
(NTSC only).
This setting is not interlocked when you change the output mode
by pressing SAP. (see 'Switching audio mode' on page 14).
Press or to select the desired option, then press OK.
Stereo Outputs stereo-audio
Mono Outputs mono-audio
SAP Outputs second audio program
4
Press MENU to exit.
Summary of sound settings
The following sound settings can be confi gured. Depending on the
sound source, some sound settings are not available.
[Auto Sound]: Sets all sound settings to the factory default.
•
[Equalizer]: Adjusts individual sound frequencies.
•
• [Virtual Surround Sound]: This selects the modes for more spatial
or surround sound reproduction.
• [Auto Volume Leveling]: Reduces sudden changes in volume, for
example, during commercials or when switching channels. Select
[On] or [Off].
• [TV Speakers]: Select [On] or [Off], or output sound to an
EasyLink compliant device. When [Speakers EasyLink] is selected,
the TV speakers are disabled and TV sound outputs to the speakers
of the compatible EasyLink compliant device. Adjust the volume
using the unit's remote control.
Changing auto sound mode
1
Press AUTO SOUND to set your TV to a predefi ned sound setting.
2
Press or to select one of the following settings:
• [Personal]: The customized settings you defi ned by using the
[Sound] menu.
• [Standard]: For normal TV viewing.
• [Movie]: Realistic sound settings for a cinematic experience.
[Music]: Emphasize high and low freq. for instrument sound.
•
[News]: Clear sound settings for human voice.
•
EN
17