STARLINK Gen 3 Router Kit Setup Manual page 2

GEN 3 ROUTER SETUP GUIDE (HIGH PERFORMANCE KIT)
Setup
1. Start by making sure your Starlink is set up and connected to the internet prior to setting up your Gen 3 Router.
Connect to your existing Starlink WiFi network from your device.
2. Unbox your Gen 3 Router Kit.
Gen 3 Router
3. Unplug your Gen 2 Router from the High Performance Power Supply, set aside.
4. Plug the Gen 3 Router into a power outlet using the power cable and power supply.
Starlink Plug RJ45 Cover Gen 3 Router Gen 3 Router
HP Cable Power Cable
1.5 m 1.5 m
(4.92 ft) (4.92 ft)
Power Supply
support.starlink.com