Philips HTS3051 User Manual page 41

Category
Audio Night Mode
Blu-ray Disc Audio
Audio Output*
• Refer to page 46 for
more information.
Speaker Setup
• This feature is
available only when
"Audio Output" is set
to "Speakers".
(Refer to page 46.)
LIST OF SETTINGS
Menus / Options
Auto
On
Off
Mix Audio Output
Primary Audio Only
Speakers
HDMI Normal
HDMI LPCM
Surround Effects Center
• Sets the surround Width
effect of audio when
Dimension -3 ~ 3
the setting of
surround mode is set
Panorama On
to "Dolby Pro Logic II
Movie" or "Dolby Pro
Logic II Music".
(Refer to "Selecting
Surround Mode" on
page 54.)
Speaker Distance Unit
Front (L/R)
Center
Surround
Default
Compresses range between soft
and loud sounds.
"Auto":
Night Mode will be activated
automatically when Dolby TrueHD
audio is played back.
"On":
Activates the Night Mode.
"Off":
Deactivates the Night Mode.
"Mix Audio Output":
The audio for the secondary video
and the interactive application will
be output together with the audio
for the primary video.
"Primary Audio Only":
Only audio for the primary video
will be output.
When playing back a BD-video which
only contains primary audio, the
audio output will be the same case
as "Primary Audio Only" even if the
"Blu-ray Disc Audio" is set to "Mix
Audio Output".
"Speakers"
Audio will be output from the
5.1ch speakers.
"HDMI Normal"
The Multi-channel audio signals
are output from HDMI OUT jack
with Bitstream or LPCM depending
on the material.
"HDMI LPCM"
The Multi-channel or stereo audio
signals are output from HDMI OUT
jack with LPCM.
0 ~ 7 default is 3 Adjust the sound balance between
center and front speakers.
default is 0 Adjust the sound balance between
front and rear speakers.
"On" :
Sets the sound of center speaker to
Off
have surround-sound effect.
"Off" :
Sets the sound of center speaker to
normal.
Feet Sets the unit of measure for
"Speaker Distance".
Meters
Feet : default is 3 Sets the distance from the listening
0 ~ 15 point to each speaker to get the
default is 3
Meters : ideal delay time.
default is 3
0 ~ 4.5 • If you change the setting of
"Front (L/R)", the setting of
"Center" and "Surround" will be
set to the same setting
automatically.
• If you set "Front (L/R)" to 0 ft (0m),
you can only select 0 ft (0m) for
"Center" and "Surround".
• Difference of the values among
"Front (L/R)" and "Center" cannot
exceed 5 ft (1.5m).
Yes Sets all speaker distance settings to
the default setting.
No
Description
EN
EN 41