Flex Time; Pausing Live Tv; Record And Play - Philips DVDR520H User Manual

F T
LEX IME
The "Flex Time" feature allows you to "Pause Live TV" and
resume viewing at the point of interruption, at your leisure.
Note: "Pause Live TV" is constrained within 3 hours.
Pausing Live TV Broadcast
1. Press [ STANDBY] to turn the unit on
2. Switch on your TV and set the video input to this
recorder.
3. Press [ CH+] [CH-] buttons on the recorder' s remote
control to select the desired channel.
Since the TV' s video input is set to be the recorder, channel
selection HAS to be made with the recorder' s remote control.
To turn the audio volume up and down, use the TV' s remote
control.
4. When you choose to leave your TV and must
stop watching, press [FLEX TIME].
When [FLEX TIME] is pressed the video broadcast on TV is set in
pause mode. The scene displayed on the TV is the last picture
shown when you press the [FLEX TIME] button.
5. When you are back in front of the TV and ready to
resume viewing, press [uPLAY] and the
TV program will begin playing starting from the
interrupted scene.
6. Press [ F.F.] or [
forward or fast rewind scanning (to the point where
[FLEX TIME] begins).
Press [ PAUSE ] to pause viewing. Press [
PAUSE ] again if you want to resume viewing.
7. Press [FLEX TIME] to turn the time shift function off
and switch to viewing live TV broadcast.
REW ] to perform fast-

Record and Play

Follow the steps below to start playback of the recorded program
before the recording is scheduled to end.
1. During recording, press [uPLAY].
Playback will start from the beginning of the recorded program.
Pr ess [
2. F.F.] [
forward or fast rewind scanning.
Press [ PAUSE ] to pause playback. Press [
PAUSE ] again if you want to resume viewing.
Press [ STOP] to stop playback/viewing.
Caution:
If you press [STOP] again, the recording function will be turned off.
3. If you want to stop recording, press [
second time.
Note:
29
REW ] to perform fast-
STOP] for a