One Touch Record; Dv Recording - Philips DVDR520H User Manual

R
ECORDING
One-touch recording
Use "One-touch recording" to start recording immediately in 30-
minute blocks. Press [RECORD] twice to start a 30-minute
recording session. Press [RECORD] repeatedly to record longer
timed recordings, up to 6 hours in thirty-minute increments.
Pressing [RECORD] when the timed recording exceeds the 6-
hour constraint automatically sets "one-touch recording" off. For
recording on DVD discs, the length of recording depends on the
current recording mode/speed and the amount of time available
on the disc. For recording on the built-in HDD, the length of
recording is 6 hours maximum.

DV recording

Before you start to record DV contents
This DVD recorder allows basic DV control functions with the
remote control. The DVD recorder is equipped with a camcorder
control (Play, Stop, FF or REW) feature via the DV Link
connection. Simply move the screen cursor to the desired
function on the DV input screen and press [OK] on the remote
control.
Use "Guide Menu" to record DV signal
1. Power on your TV and this DVD recorder.
2. Connect the DV cable (IEEE-1394 4-pin to 4-pin
cable) to both the DV Camcorder and the DVD-
Recorder.
3. Power on the DV Camcorder. Start "Playback
mode" on the DV Camcorder.
4. "Pause" the DV Camcorder at where you want to
record.
5. Press [ GUIDE] on the remote control.
This activates the Guide menu.
6. Press [p] [q] to select the "RECORD" icon, and
press [OK] to start recording.
7. Press [p] [q] to select "DV" and press [OK] to
confirm.
8. Press [p] [q] to select HDD or DVD and press
[OK].
9. Press [p] [q] to set the recording quality, and
press [OK] to confirm.
10.Press [OK] to start recording.
Notes:
This DVD-Recorder will stay in "Pause" mode when no DV input
signal is detected.
11.To pause recording.
Press [ PAUSE ] on the remote control to pause recording.
Press [ PAUSE ] again, if you want to resume recording.
12.To stop recording.
Press [ ] to stop recording.
Note:
Before playing a DVD+R disc on another player, you will first
need to finalize the disc. Reference the "finalize" function in the
"Disc Tools" section for additional information.
24