Table of Contents
Advertisement
10
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
11
Press the shutter release button fully.
Interval movie recording starts.
The LCD turns off between shots (during standby). Press the power
switch during standby to display the remaining time and interval on the
monitor.
The [Stop interval shooting?] message is displayed when the power
switch and then the 3 button are pressed during standby.
3
Pressing the 4 button cancels interval movie.
Setting from Menu
You can set the Interval Movie from [A Rec. Mode] menu.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select the [Movie].
3
Press the four-way controller (5).
The [Movie] screen appears.
4
Use the four-way controller
(23) to select the [Interval
Shoot].
5
Press the four-way controller (5).
The interval movie setting screen appears. The rest of the procedure
is the same as steps 4-11 in "Setting from Drive Mode". See those
procedures if you need more information.
156
Movie
Recorded Pixels
Movie SR
Interval Shoot
MENU
Hide quick links:
Advertisement
Table of Contents
