Pentax Optio W90 Operating Manual page 128

1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Recorded
Pixels].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to change the number
3
of recorded pixels.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
• The number of recorded pixels for images captured in 9 (Green)
mode is fixed at E.
• The number of recorded pixels for images captured in N (Frame
Composite) is fixed at h/L.
• The number of recorded pixels for images captured in X (Digital
Wide) mode is fixed at f. (The number of recorded pixels will be h
if you exit Digital Wide mode without taking the second picture.)
• The number of recorded pixels for images shot in
is set to V (1280×960).
• If you take and save only the first frame in F (Digital Panorama)
mode, the number of recorded pixels is fixed at i.
• The number of recorded pixels for images captured in c (Digital SR)
mode is fixed at f/W.
• The number of recorded pixels for images captured in
Microscope) mode is fixed at L.
126
Recordable Image No.
Image Tone
12
M
Recorded Pixels
9
M
Quality Level
7
M
White Balance
5.3
AF Setting 5
M
AE Metering
3.8
Cancel
MENU
(Report) mode
(Digital
12
M
M
OK
OK