Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GLOBBER E-MOTION 27
Summary of Contents for GLOBBER E-MOTION 27
- Page 1 E-MOTION 27 350W FOLDABLE ELECTRIC SCOOTER/ TROTTINETTE ÉLECTRIQUE PLIABLE Class 2 / Classe 2 Original instructions EN17128:2020 Instructions d’origine Personal Light Electric Vehicle (PLEV) From/De 1.55 m 5’1” 220lbs to/à 2.0 m 6’6”...
-
Page 2: Technical Specification
Please keep these instructions for future reference. EN 17128:2020 CLASS 2: 100KG MAX READ THE INSTRUCTIONS PROVIDED BY THE MANUFACTURER BEFORE USING THE PRODUCT. 1 - SAFE USE OF THE ELECTRIC SCOOTER This appliance can be used by children aged from 14 years old and above and by persons with reduced physical, sensory, or mental capabilities or those with lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. -
Page 3: On/Off Function
- When the LCD screen lights up, the scooter is in “ON” mode. - To turn off the scooter, press and hold the ON/OFF button until the LCD screen turns off. - Your E-MOTION 27 will automatically turn off after 10 minutes of inactivity. START-UP Once the scooter is in ON mode, it is now ready to use. -
Page 4: Front Light
SPEED MODE SELECTION When you first press the ON/OFF button, the scooter is by default in “speed mode 3”. When the scooter is in “ON” mode, but the motor is not engaged, the scooter is in “standby mode”. In standby mode, you can switch between the 3 speed modes by double-clicking the ON/OFF button. Speed mode 3 (default mode): Max speed is 25km/h. The LCD screen will show 3 bars on the «... -
Page 5: Handle Bar Assembly
4 - ASSEMBLY UNFOLD THE SCOOTER Step 1. Open the lever and raise the t-bar to the maximum height until the folding mechanism is locked. Note: Please ensure that the folding lever is open before you raise the t-bar. Otherwise, the t-bar cannot lock in the upright position. Step 2. -
Page 6: Fold The Scooter
The folding mechanism may loosen after some time of use. In this case, use the supplied hex wrench to tighten the bolt gradually. FOLD THE SCOOTER 1. Press the red button located on the folding lever, and open the folding lever. 2. - Page 7 If in doubt please contact us at contact@globber.com Important: - Prior to attempting any product repairs yourself, please contact your retailer and/or Globber directly at contact@globber.com to get the full technical and safety recommendations. - In case of battery leakage, do not touch it.
- Page 8 • Use with caution on clean, dry flat surfaces and if possible, away from other users. Respect the road safety regulations. • Braking distances are increased in rainy weather or when wheels are wet. • Traffic in the city has many obstacles to cross, such as curbs and steps. It is recommended to avoid obstacle jumps. It is important to anticipate and adapt your trajectory and speed to those of a pedestrian before crossing these obstacles. It is also recommended to get off of the vehicle when these obstacles become dangerous due to their shape, height, or slippage. •...
-
Page 9: Maintenance
• Caution: The rear wheel has a motorised part. If you wish to check the motorized part or change it, contact a qualified technician or a Globber representative at contact@globber.com. • Eliminate any sharp edges generated by use. • Do not modify or transform the vehicle, including the steering tube and sleeve, stem, folding mechanism, and rear brake, or the warranty will be invalid. -
Page 10: Warranty
The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product. Globber does not offer an extended warranty. If you have purchased an extended warranty, it must be honoured by the store at which it was purchased. -
Page 11: Troubleshooting
2 - Your scooter is new and has low autonomy? In both cases (1 and 2), the battery needs to be changed, please contact your dealer or a Globber representative at contact@globber.com Excessive overload occurs during a steep incline or when the rider is too Excessive use of heavy;... -
Page 12: Error Code
11 – BUILT-IN MALFUNCTION DETECTION SYSTEM This E-MOTION 27 scooter has a built-in malfunction detection system. In the event of an electrical problem, the screen will display an ERROR code. Refer to the below table to find the related cause and remedial actions required. IMPORTANT: Prior to repairing, contact your retailer to get disassembly and assembly recommendations at contact@globber.com. - Page 13 ENGLISH...
Need help?
Do you have a question about the E-MOTION 27 and is the answer not in the manual?
Questions and answers