Table of Contents
Advertisement
User name
Password
Domain
Require SSL
connection (Outgoing
mail server only)
Now you are ready to set up your account:
1. Select Start > Messaging > Setup E-mail.
2. Enter your e-mail address and password. Select Save password if you want, or
you can enter the password each time you send and receive e-mails. Then select Next.
3. Select Next. If the device is connected to the internet, the Auto Setup feature will
attempt to retrieve settings for this e-mail account, saving you the effort of typing
in all the required settings. If no matching settings are found (or if no internet
connection exists), then you will need to enter each setting manually.
4. Enter the name you want to appear when you send messages, then select Next.
5. In Automatic Send/Receive, select a frequency for sending/receiving e-mails.
Please note that data charges will probably be incurred if you send and receive
e-mail outside of WiFi or Bluetooth range. Select Review all download settings
to change your e-mail settings; otherwise, select Finish to start downloading
messages.
NOTE: To change options for an e-mail account, select Start > Messaging > Menu > Options
and then select the type of options to change.
IMPORTANT: If you save your password and then lose your phone, someone finding your phone
might be able to gain access to your e-mail.
54
Your user name for the outgoing e-mail server.
Your password for the outgoing e-mail server.
The domain name of the outgoing e-mail server.
A connection that enables you to send personal information more securely. Note that if
you select this and your ISP does not support an SSL connection, you will not be able to
send e-mail.
Advertisement
Table of Contents
