Pentax Optio RZ10 Operating Manual page 125

8
Use the four-way controller (23)
to select the function you want to
register.
The following functions can be registered.
Still picture mode
functions
Movie mode
functions
9
Press the 4 button.
The setting is registered.
Repeat Steps 6 to 9 to register other keys.
10
Press the 3 button twice.
The camera returns to capture status.
Only one function can be registered to each key.
To Use Fn Setting
1
Press the 9 button in A mode.
The functions registered with Fn Setting on the [Fn Setting] screen
appear.
The displayed functions differ depending on whether the camera is in
still picture mode or movie mode before the 9 button is pressed.
2
Use the four-way controller
(2345) to select a function to
change.
Recorded Pixels/White Balance/Focusing Area/AE
Metering/Highlight Correction/Shadow Correction/
Sensitivity/EV Compensation/Sharpness/Saturation/
Contrast
Recorded Pixels/Movie SR/White Balance/Focusing Area/
EV Compensation/Sharpness/Saturation/Contrast
Green Button
EV Compensation
Recorded Pixels
+
Sensitivity
+
White Balance
+
Focusing Area
+
AE Metering
Cancel
MENU
± 0.0 ± 0.0
AUTO AUTO AW B AWB
14
M
OK
OK
3
123