Harbor Freight Tools CHICAGO ELECTRIC 69231 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Saw
  5. CHICAGO ELECTRIC 69231
  6. Owner's manual & safety instructions

Harbor Freight Tools CHICAGO ELECTRIC 69231 Owner's Manual & Safety Instructions

7" portable wet cutting tile saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Owner's Manual & Safety Instructions
Save This Manual
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
Keep this manual and the receipt in a safe and dry place for future reference.
the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
When unpacking, make sure that
and undamaged. If any parts are missing or broken,
the product is intact and undamaged.
please call 1-888-866-5797 as soon as possible.
If any parts are missing or broken, please call
1-888-866-5797 as soon as possible.
©
©
Copyright
2021 by Harbor Freight Tools
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
®
. All rights reserved.
. All rights reserved.
Blade Sold Separately
Read this material before using this product.
Read this material before using this product.
Failure to do so can result in serious injury.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
SAVE THIS MANUAL.
21l

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CHICAGO ELECTRIC 69231 and is the answer not in the manual?

Questions and answers

Related Manuals for Harbor Freight Tools CHICAGO ELECTRIC 69231

Summary of Contents for Harbor Freight Tools CHICAGO ELECTRIC 69231

  • Page 1 Failure to do so can result in serious injury. Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. any shape or form without the express written consent of Harbor Freight Tools.

  • Page 2: Important Safety Information

    Table of Contents Safety ..........2 Maintenance ........13 Specifications ........9 Parts List and Diagram ....14 Setup ..........9 Warranty .......... 16 Operation ......... 10 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3 General Tool Safety Warnings (cont.) 13. DON’T OVERREACH. Keep proper Table A: RECOMMENDED MINIMUM WIRE GAUGE footing and balance at all times. FOR EXTENSION CORDS (120 VOLT) 14. MAINTAIN TOOLS WITH CARE. Keep EXTENSION CORD NAMEPLATE tools sharp and clean for best and safest performance.

  • Page 4: Grounding Instructions

    Grounding Instructions TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION READ AND FOLLOW THESE INSTRUCTIONS: 110-120 VAC Grounded Tools: Tools with Three Prong Plugs 1. In the event of a malfunction or breakdown, 6. Repair or replace damaged or grounding provides a path of least resistance for worn cord immediately.
  • Page 5 These carry important safety information. to bend, grabbing the blade. If unreadable or missing, contact Harbor Freight Tools for a replacement. • Do not use a dull or damaged blade. • Maintain control of the workpiece. Do not 21. Avoid unintentional starting.

  • Page 6: Essential Straight Push-Stick Features And Functions

    Essential Straight Push-stick Features and Functions Handle Notch Note: Straight style (traditional) stick shown. A different stick design may be used if it properly protects against all hazards. • Must be far Diagram not to scale. enough down the stick to allow •...

  • Page 7: Position Of Tile Saw

    POSITION OF TILE SAW EXTENSION CORDS 4. Use only extension cords that are intended for outdoor use. These extension cords are identified Tile Saw by a marking “Acceptable for use with outdoor tools; store indoors while not in use.” Use only extension cords having an electrical rating not less than the rating of the product.

  • Page 8: Vibration Safety

    Vibration Safety This tool vibrates during use. Repeated 2. Do not smoke during use. Nicotine reduces or long-term exposure to vibration may cause the blood supply to the hands and fingers, temporary or permanent physical injury, increasing the risk of vibration-related injury. particularly to the hands, arms and shoulders.

  • Page 9: Specifications

    Specifications Electrical Rating 120VAC / 60Hz / 4.8A Motor No Load Speed 3,550 RPM Arbor Size 5/8" Max. Accessory Diameter 7" Bevel Cut 0-45° 1" @ 90° Maximum Depth of Cut 3/5" @ 45° Blade Type Diamond, continuous rim (sold separately) Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

  • Page 10: Tool Set Up

    Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch of the tool to its “OFF” position, remove the Safety Lock and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.

  • Page 11: Work Piece And Work Area Set Up

    Work Piece and Work Area Set Up 1. Designate a work area that is clean and well-lit. 3. Make sure that the Base is on a steady level The work area must not allow access by children work surface so the water level of the tank can or pets to prevent distraction and injury.
  • Page 12 3. For Straight/Miter Cuts: a. Install the Rip Fence on the Table Top with or without the Miter Gauge. b. Place the workpiece on the Table and firmly against the Miter Gauge and/or Rip Fence. c. Make sure the workpiece is clear of the Blade, then dry your hands, plug in the Saw, insert the Safety Lock and turn the Power Switch ON.

  • Page 13: Cleaning, Maintenance, And Lubrication

    Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch of the tool to its “OFF” position, remove the Safety Lock and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
  • Page 14 Parts List and Diagram Part Description Part Description nut M5 Lock Press Plate Upper Blade Guard Housing Bracket Cross Sunk Head Screw (M4 x 10) Warning Label Foot Roll Pin Big Flat Washer 5 Bevel Lock Knob Nylon Locknut M6 Table Top Hex Bolt M6 x 12 Moving Paw...

  • Page 15: Please Read The Following Carefully

    PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

  • Page 16: Limited 90-Day Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

Table of Contents