Panasonic UF-490 Software Manual page 74

Document Scanner
Main Window
6. Slice Level (valid only when monochrome is selected)
Specify the value of distinction between monochrome for monochrome manuscript. Adjust the value according to
density of a manuscript to be scanned.
7. Brightness (valid only when halftone or grayscale is selected)
Adjust the brightness for halftone or grayscale documents.
8. Contrast (valid only when halftone or grayscale is selected)
Adjust the contrast (difference between dark and light) for halftone or grayscale documents.
9. Invert
Scan the image in negative.
10. Edge Enhancement
Scan the image with a highlighted edge.
11. Output Size
Displays size of the scanning image and the size of the scanned file.
The output size is determined by the size of the scanning area (black frame) in the preview window and the
resolution.
12. Unit
Select the unit of measurement (mm, inch, or pixel).
13.
Scan
Scan an image into the document desktop.
14.
Preview
Perform preview scanning and display the image on the preview window.
15.
Zoom In
Zoom in/out for a preview-scan image.
NOTE
74
button
button
/ Zoom Out button
1. The menu for operating the Document Scanner (scanner driver) depends on the application.
Refer to the manuals of the application for details.
2. If a TWAIN-compatible application has not been installed, select Document Scanner from the
Start menu.