Panasonic UF-490 Software Manual page 15

Windows 95/98/Me
• Spool Data Type
Select spool data type (EMF format or RAW format). Specifying RAW format results in longer time
before placing an application operational after printing on the application.
Note: Spooling by EMF format (metafile compression) may cause the following problems on some
application software.
1) Printing result is different from the screen display.
2) Printing requires excessive time.
• Enable bidirectional support
Be sure to check the check box for "Enable bidirectional support" when installing the status monitor
(See page 102). Otherwise, printing may not function properly.
9. button
Port Settings...
Modifies printer port settings.
Configuring the Printer Driver Settings
15