Step 4 Ac Mains Lead Connection; Step 5 Preparing The Remote Control - Panasonic SC-PT570 Operating Instructions Manual

3
Audio and video connections (continued)
Other audio connections
TV or external
equipment
terminal
OPTICAL OUT
AUDIO
OUT
L
R
[Note]
If you have various sound sources (such as Blu-ray player, DVD recorder, VCR, etc.), connect them to the available inputs on the TV and the TV
output should then be connected to the AUX or OPTICAL IN terminal of the main unit.
step 4 AC mains lead connection
To household mains socket
AC mains lead (included)
step 5 Preparing the remote control
Batteries
Insert so the poles ( and ) match those in the remote control.
R6/LR6, AA
Replace the cover.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
8
Cable required
(not included)
≥ Do not bend sharply when
connecting.
Optical digital audio cable
Audio cable
Main unit
AC IN
Press in and lift up.
3
AUX
Y
L
P
B
R
AV OUT
P
R
OPTICAL
COMPONENT
IN
VIDEO OUT
Main unit terminal
This is the preferred connection for best sound and true
[\\\\\\OPTICAL\IN\\\\\\]
surround sound.
This unit can decode the surround signals received from
your TV, cable or satellite STB. Refer to the operating
instructions for the TV, cable or satellite STB for the
settings necessary to output its audio from the digital audio
OPTICAL
output to your home theater system. Only Dolby Digital
IN
and PCM can be played with this connection.
≥ After making this connection, make settings to suit the
type of audio from your digital equipment (
[\\\\\\\\\\\AUX\\\\\\\\\\\] This connection enables you to play audio from your
TV, STB or VCR through your home theater system
AUX ( 12, Selecting the source by the remote control).
L
R
Conserving power
The main unit consumes a small amount of power, even when it is in
standby mode (approx. 0.2 W). To save power when the unit is not to be
used for a long time, unplug it from the household AC mains socket.
You will need to reset some memory items after plugging in the main
unit.
[Note]
The included AC mains lead is for use with the main unit only.
Do not use it with other equipment. Also, do not use cords for other
equipment with the main unit.
≥ Use alkaline or manganese batteries.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Use
Aim at the remote control signal sensor (
maximum range of 7 m directly in front of the unit.
Main unit
AV AV
Features
35), avoiding obstacles, at a
12).