Panasonic Toughbook CF-U1GQG6L2M Reference Manual page 98

Flash Memory Backup / Restore Function
[Backup and Restore Center] and [System Recovery Options] allow you create a backup of the entire flash memory data,
which can be used to recover from hardware failure.
<For Numeric keyboard model>
Connecting the USB keyboard to the computer or USB port of the Cradle is necessary.
The following explanations show operations using key combinations of Fn and other keys. When using USB keyboard, press
buttons indicated in ( ).
Example: Press Fn + U (F2)
Panasonic Corporation will bear no responsibility for any damage suffered (including loss of data) as a result of the use of
this function.
Creating a backup of the flash memory data
To create a backup of the entire flash memory to another storage media (e.g., external hard disk): Use [Back up computer].
To create a backup of a file or a folder: Use [Back up files].
For further information, click
NOTE
Connect the AC adaptor and do not remove it until backup is complete.
Restoring the flash memory data
NOTE
This function does not work when you turn on the computer for the first time or just after you reinstall Windows.
Start and shut down Windows 7, and then you can use the function.
Connect the AC adaptor and do not remove it until restoration is complete.
1
Turn on the computer, and when [Panasonic] boot screen disappears, press and hold
+ (F8).
Fn L
If [Enter Password] is displayed during the following procedure, input the Supervisor Password or the User
Password.
2
Release your finger when [Advanced Boot Options] is displayed.
3
Press to select [Repair Your Computer] and press
[System Recovery Options] appears.
Press F2
(Start) - [Control Panel] - [Back up your computer].
98
(Enter).