Related Manuals for Racing RACPV18L-37
Summary of Contents for Racing RACPV18L-37
- Page 1 ORIGINAL INSTRUCTIONS INSTRUCTION MANUAL RACPV18L-37 CORDLESS DRILL BUILDER SAS 32, rue Aristide Bergès -ZI 31270 Cugnaux –France IMPORTANT: Please read the instruction manual before using.
-
Page 2: Table Of Contents
ORIGINAL INSTRUCTIONS CONTENTS 1. APPLICATION......................4 2. DESCRIPTION......................4 3. PACKAGE CONTENT LIST..................4 4. SYMBOLS........................ 5 5. GENERAL POWER TOOL SAFETY WARNINGS...........5 6. SCREWDRIVER SAFETY WARNING..............7 7. ADDITIONAL SAFETY WARNINGS.................7 8. OPERATION......................10 9. CLEANING AND MAINTENANCE................11 10. TECHNICAL DATA....................12 11. - Page 3 ORIGINAL INSTRUCTIONS Fig. A...
-
Page 4: Application
ORIGINAL INSTRUCTIONS 1. APPLICATION The power tool is intended for driving and drilling through wood and plastics It is not designed for professional use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. -
Page 5: Symbols
ORIGINAL INSTRUCTIONS 4. SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury In accordance with essential or damage to the tool. requirements of the European directive(s) Wear eye protection Wear gloves Read manual before use Max temperature Recycle... - Page 6 ORIGINAL INSTRUCTIONS f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
-
Page 7: Screwdriver Safety Warning
ORIGINAL INSTRUCTIONS c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. - Page 8 ORIGINAL INSTRUCTIONS ▪ Do not charge other batteries. The battery charger is suitable only for charging our lithium ion batteries within the listed voltage range. Otherwise there is danger of fire and explosion. ▪ Keep the battery charger clean. Contamination may cause the danger of electric shock. ▪...
- Page 9 ORIGINAL INSTRUCTIONS ▪Before the use of the charger and the battery read the instruction manual carefully. ▪During the charge process, the current used should correspond to the current of the battery charger. ▪Never let moisture, rain or splashed water reaches the charging location.
-
Page 10: Operation
ORIGINAL INSTRUCTIONS ▪When the battery is outside the drill, cover the contacts to avoid short circuits (e.g. from tools) ▪Do not throw batteries into water or fire, risk of explosion! ▪Protect the battery from impacts, and don't open it. ▪Never discharge the battery completely and recharge occasionally if not used for a prolonged period WARNING: recharge... -
Page 11: Cleaning And Maintenance
ORIGINAL INSTRUCTIONS ▪Open the chuck by turning the collar. ▪Insert the drill or screw bit in the chuck. ▪Close the chuck by firmly tightening the front collar (a) while holding the rear part (b) of the chuck with the other hand. ▪In order to remove the drill or screw bit proceed in reverse order. -
Page 12: Technical Data
ORIGINAL INSTRUCTIONS 10. TECHNICAL DATA Model nr. RACPV18L-37 Rated voltage 18Vd.c. (20V max) No – load speed 0-400 / 0-1400min-¹ Torque positions 18+1 Max. drill capacity steel 0.8-10mm Charger Input: 100-240~,50/60Hz, 0.8A, output: 21.5V d.c., 1.5A Charger time Battery capacity... -
Page 13: Environment
BUILDER SAS ZI, 32 rue Aristide Bergès – 31270 Cugnaux – France Declares that the machinery designated below: Drill / Screwdriver RACPV18L-37 S/N: 20200901001-20200901600 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. -
Page 14: Warranty
16. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 15: Product Failure
17. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 16: Warranty Exclusions
18. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the RACPV18L-37 and is the answer not in the manual?
Questions and answers